f78 Installing GNU CC Contents|Index|Previous|Next
 

Installing GNU CC 

The following documentation discusses installing GNU CC for Unix systems.
 

In the following documentation, we assume you compile in the same directory that contains the source files; see Compilation in a separate directory to find out how to compile in a separate directory on Unix systems.

You cannot install GNU CC by itself on MSDOS; it will not compile under any MSDOS compiler except itself. You need to get the complete compilation package, DJGPP, which includes ffb binaries as well as sources, and includes all the necessary compilation tools and libraries.

1.
If you have built GNU CC previously in the same directory for a different target machine, do make distclean to delete all files that might be invalid. One of the files that make distclean deletes is Makefile; if make distclean complains that Makefile does not exist, it probably means that the directory is already suitably clean.

2.
On a System V release 4 system, make sure /usr/bin precedes /usr/ucb in PATH. The cc command in /usr/ucb uses libraries which have bugs.

3.
Specify the host, build and target machine configurations. You do this by running the file, configure.

The build machine is the system which you are using, the host machine is the system where you want to run the resulting compiler (normally the build machine), and the target machine is the system for which you want the compiler to generate code.

If you are building a compiler to produce code for the machine it runs on (a native compiler), you normally do not need to specify any operands to configure; it will try to guess the type of machine you are on and use that as the build, host and target machines. So you don’t need to specify a configuration when building a native compiler unless configure cannot figure out what your configuration is or guesses wrong.

In those cases, specify the build machine’s configuration name with the option, --build; the host and target will default to be the same as the build machine. The following is an example of a specification command.

A configuration name may be canonical or it may be more or less abbreviated. A canonical configuration name has three parts, separated by dashes. It uses the following parts. The three parts may themselves contain dashes; configure can figure out which dashes serve which purpose. For example, m68k-sun-sunos4.1 specifies a Sun 3. (If you are building a cross-compiler, see Building and installing a cross-compiler.)

You can also replace parts of the configuration by nicknames or aliases. For example, sun3 stands for m68k-sun, so sun3-sunos4.1 is another way to specify a Sun 3. You can also use sun3-sunos, since the version of SunOS is, by default, version 4.

You can specify a version number after any of the system types, and some of the CPU types. In most cases, the version is irrelevant, and will be ignored. So you might as well specify the version if you know it.

There are four additional options you can specify independently to describe variant hardware and software configurations: --with-gnu-as, --with-gnu-ld, --with-stabs and --nfp. The ‘configure’ script searches subdirectories of the source directory for other compilers that are to be integrated into GNU CC.

The GNU compiler for C++, called g++, is in a subdirectory named ‘cp’. ‘configure’ inserts rules into Makefile to build all of those compilers.

In the following, we clarify which files will be set up by configure. Normally you need not be concerned with these files.

4.
The standard directory for installing GNU CC is /usr/local/lib.

If you want to install its files somewhere else, specify ‘--prefix=dir’ when you run ‘configure’. dir is a directory name to use instead of /usr/local for all purposes with one exception: the directory /usr/local/include is searched for header files no matter where you install the compiler. To override this name, use the ‘--local-prefix’ option in Step 5.

5.
Specify ‘--local-prefix=dir’ if you want the compiler to search directory  dir/include for locally installed header files instead of /usr/local/include.

You should specify ‘--local-prefix’ only if your site has a different convention (not /usr/local) for where to put site-specific files.

The default value for ‘--local-prefix’ is ‘/usr/local’ regardless of the value of ‘--prefix’. Specifying ‘--prefix’ has no effect on which directory GNU CC searches for local header files. This may seem counterintuitive, but actually it is logical. The purpose of ‘--prefix’ is to specify where to install GNU CC. The local header files in ‘/usr/local/include’—if you put any in that directory—are not part of GNU CC. They are part of other programs—perhaps many others. (GNU CC installs its own header files in another directory which is based on the ‘--prefix’ value.)

The directory you use for ‘--local-prefix’ must not contain any of the system’s standard header files. If it did contain them, certain programs would be miscompiled (including GNU Emacs, on certain targets), because this would override and nullify the header file corrections made by the ‘fixincludes’ script.

Indications are that people use this option use it based on mistaken ideas of its purpose. They use it as if it specified where to install GNU CC, perhaps on the assumption that installing GNU CC creates this directory.

6.
Make sure the Bison parser generator is installed. (This is unnecessary if the Bison output files ‘c-parse.c’ and ‘cexp.c’ are more recent than
‘c-parse.y’ and ‘cexp.y’ and you do not plan to change the ‘.y’ files.)

Bison versions older than Sept 8, 1988 will produce incorrect output for ‘c-parse.c’.

7.
If you have chosen a configuration for GNU CC which requires other GNU tools (such as GAS or the GNU linker) instead of the standard system tools, install the required tools in the build directory under the names as, ld, or whatever is appropriate. This will enable the compiler to find the proper tools for compilation of the program ‘enquire’.

Alternatively, you can do subsequent compilation using a value of the PATH environment variable such that the necessary GNU tools come before the standard system tools.

8.
Build the compiler. Just type ‘make LANGUAGES=c’ in the compiler directory. ‘LANGUAGES=c’ specifies that only the C compiler should be compiled. The Makefile normally builds compilers for all the supported languages; currently, C, C++ and Objective C. However, C is the only language that is sure to work when you build with other non-GNU C compilers. In addition, building anything but C, at this stage, is a waste of time.

In general, you can specify the languages to build by typing the argument ‘LANGUAGES="list"’ where list is one or more words from the list c, c++, and objective-c. If you have any additional GNU compilers as subdirectories of the GNU CC source directory, you may also specify their names in this list.

Ignore any warnings you may see about “statement not reached” in ‘insn-emit.c’; they are normal. Also, warnings about “unknown escape sequence” are normal in ‘genopinit.’ and perhaps some other files. Likewise, you should i ffb gnore warnings about “constant is so large that it is unsigned” in ‘insn-emit.c’ and ‘insn-recog.c’ and a warning about a comparison always being zero in ‘enquire.o’. Any other compilation errors may represent bugs in the port to your machine or operating system, and should be investigated and reported (see Reporting bugs). Some commercial compilers fail to compile GNU CC because they have bugs or limitations. For example, the Microsoft compiler is said to run out of macro space. Some Ultrix compilers run out of expression space; then you need to break up the statement where the problem happens.

9.
If you are building a cross-compiler, stop here. See Building and installing a cross-compiler.

10.
Move the first-stage object files and executables into a subdirectory with the following command:

The files are moved into a subdirectory named stage1. Once installation is complete, you may wish to delete these files with rm -r stage1.

11.
If you have chosen a configuration for GNU CC which requires other GNU tools (such as GAS or the GNU linker) instead of the standard system tools, install the required tools in the stage1 subdirectory under the names as, ld or whatever is appropriate. This will enable the stage 1 compiler to find the proper tools in the following stage.

Alternatively, you can do subsequent compilation using a value of the PATH environment variable such that the necessary GNU tools come before the standard system tools.

12.
Recompile the compiler with itself, with the following command.

This is called making the stage 2 compiler. The command shown in the previous example builds compilers for all the supported languages. If you don’t want them all, you can specify the languages to build by typing the argument ‘LANGUAGES="list"’. Where list should contain one or more words from the list ‘c’, ‘c++’, ‘objective-c’, and ‘proto’. Separate the words with spaces. proto stands for the programs protoize and unprotoize; they are not a separate language, but you use LANGUAGES to enable or disable their installation. If you are going to build the stage 3 compiler, then you might want to build only the C language in stage 2. Once you have built the stage 2 compiler, if you are short of disk space, you can delete the subdirectory stage1. On a 68000 or 68020 system lacking floating point hardware, unless you have selected a ‘tm.h’ file that expects by default to find no hardware; instead, use the following command. 13.
If you wish to test the compiler by compiling it with itself one more time, install any other necessary GNU tools (such as GAS or the GNU linker) in the stage2 subdirectory as you did in the stage1 subdirectory; then, use the following. This is called making the stage 3 compiler. Aside from the ‘-B’ option, the compiler options should be the same as when you made the stage 2 compiler. But the LANGUAGES option need not be the same. The command in the previous example builds compilers for all the supported languages; if you don’t want them all, you can specify the languages to build by typing the argument ‘LANGUAGES="list"’ as described in Step 8. If you don’t have to install any additional GNU tools, you may use the following command instead of making stage1, stage2, and performing the two compiler builds. 14.
Then compare the latest object files with the stage 2 object files—they ought to be identical, aside from time stamps (if any).

On some systems, meaningful comparison of object files is impossible; they always appear “different”. This is currently true on Solaris and some systems that use ELF object file format. On some versions of Irix on SGI machines and DEC Unix (OSF/1) on Alpha systems, you will not be able to compare the files without specifying -save-temps; see the description of individual systems above to see if you get comparison failures. You may have similar problems on other systems. Use the following command to compare the files.

This will mention any object files that differ between stage 2 and stage 3. Any difference, no matter how innocuous, indicates that the stage 2 compiler has compiled GNU CC incorrectly, and is therefore a potentially serious bug which you should investigate and report (see Reporting bugs).

If your system does not put time stamps in the object files, then use the following as a faster way to compare them (using the Bourne shell).

15.
Install the compiler driver, the compiler’s passes and run-time support with ‘make install’. Use the same value for CC, CFLAGS and LANGUAGES that you used when compiling the files that are being installed. One reason this is necessary is that some versions of Make have bugs and recompile files gratuitously when you use this step. If you use the same variable values, those files will be properly recompiled.

For example, if you have built the stage 2 compiler, you can use the following command.

This copies the files ‘cc1’, ‘cpp’ and ‘libgcc.a’ to files ‘cc1’, ‘cpp’ and ‘libgcc.a’ in the directory /usr/local/lib/gcc-lib/target/version, which is where the compiler driver program looks for them. In this case, target is the target machine type specified when you ran configure, and version is the version number of GNU CC.

This naming scheme permits various versions and/or cross-compilers to coexist. It also copies the executables for compilers for other languages (e.g., ‘cc1plus’ for C++) to the same directory.

This also copies the driver program ‘xgcc’ into /usr/local/bin/gcc, so that it appears in typical execution search paths.

It also copies ‘gcc.1’ into /usr/local/man/man1 and info pages into /usr/local/info.

On some systems, this command causes recompilation of some files. This is usually due to bugs in make. You should either ignore this problem, or use GNU Make.

(It is usually better to install GNU CC executables from stage 2 or 3, as they usually run faster than ones compiled with some other compiler.)

16.
If you’re going to use C++, it’s likely that you need to also install the l ffb ibg++ distribution. It should be available from the same place where you got the GNU C distribution.

Just as GNU C does not distribute a C runtime library, it also does not include a C++ run-time library. All I/O functionality, special class libraries, etc., are available in the libg++ distribution.

17.
GNU CC includes a runtime library for Objective-C because it is an integral part of the language. You can find the files associated with the library in the subdirectory ‘objc’. The GNU Objective-C Runtime Library requires header files for the target’s C library in order to be compiled,and also requires the header files for the target’s thread library if you want thread support. See Cross-compilers and header files for discussion about header files issues for cross-compilation.

When you run ‘configure’, it picks the appropriate Objective-C thread implementation file for the target platform. In some situations, you may wish to choose a different back-end as some platforms support multiple thread implementations or you may wish to disable thread support completely. You do this by specifying a value for the OBJC_THREAD_FILE makefile variable on the command line when you run make. Use the folllowing example, for instance.

The following lists the currently available back-ends. 0